mechSolverCommon.initJSAV("S23torsionproblemFeb7", "SI", 1200)

The illustrated shaft consists of two steel pipe segments, with the left segment having an outer diameter of 200 mm and a wall thickness of 10 mm , and the right segment having an outer diameter of 120 mm and wall thickness of 12 mm . Torques are applied in opposite directions, as shown in the figure.

What is the maximum shear stress in the left segment marked (1)?

The illustrated shaft consists of two steel pipe segments, with the left segment having an outer diameter of 200 mm and a wall thickness of 10 mm, and the right segment having an outer diameter of 120 mm and wall thickness of 12 mm. Torques are applied in opposite directions, TB is 34 kN.m applied anticlockwise, and TC is 19kN.m applied clockwise. 34 kN m 19 kN m


[ mechSolverCommon.globalSolutionBoxes ]
var answer = mechSolverCommon.checkAnswer(); if (!guess[0] && !answer) { return ""; // User did not click, and correct answer is not // initial array state } else { return answer; }